PIPER SENECA

The Piper Seneca is a twin-engine, retractable landing gear, turbocharged airplane. It has seating for up to six occupants and two separate 100-pound luggage compartments. It has counter-rotating propellers for added safety and has a cruise speed of approximately 184 mph (160 knots).

The Seneca has a Garmin 430 GPS and is used for multi-engine training and may be rented for personal use.

General characteristics:

  • Capacity: 6
  • Length: 28 ft 6 in
  • Wingspan: 38 ft 11 in
  • Height: 9 ft 11 in
  • Empty: 2,623 lb
  • Useful load: 1,947 lb
  • Maximum takeoff: 4,570 lb
  • Pay load (full fuel): 1,209 lb
  • Powerplant: 2 x Continental TSIO-360 (200hp @ S.L., 215hp @ 12,000ft)
  • Two-blade, constant-speed propellers
  • Fuel capacity: 123 gallons

Performance:

  • Max Speed: 225 mph (196 kts) @ 12,000 ft
  • Cruise speed: 184 mph (160 knots)
  • Stall speed: 71 mph (62 kts), landing configuration
  • Range: 800-1,100 miles
  • Service ceiling: 25,000 ft, single-engine, 13,400 ft
  • Rate of climb: 1,340 ft/min, single-engine, 225 ft/min

Takeoff:

  • Ground Roll: 870 ft
  • Over 50 ft Obstacle: 1,240 ft

Landing:

  • Ground Roll: 1,380 ft
  • Over 50 ft Obstacle: 2,110 ft

Equipment list:

  • GNS 430 GPS
  • King KR86 ADF
  • King KI525 HSI
  • Altimatic IIIC Autopilot
  • King KX155 NAV/COM
  • Club Seating

Request More Information

5 + 5 =

FARGO JET CENTER - FLIGHT SHCOOL
Hector International Airport (KFAR)
3802 20th Street North
Fargo, ND 58102 USA
fly@fargojet.com | +1 (701) 373-8864

EXCLUSIVE AIRCRAFT SALES
Flying Cloud Airport (KFCM)
14801 Pioneer Trail | Eden Prairie, MN 55347
+1 (651) 450-6200
sales@exclusiveaviation.com

FARGO JET CENTER
Hector International Airport (KFAR)
3802 20th Street North | Fargo, ND 58102
+1 (800) 770-0538 | +1 (701) 235-3600
info@fargojet.com

PREMIER JET CENTER
Flying Cloud Airport (KFCM)
14801 Pioneer Trail | Eden Prairie, MN 55347
+1 (855) 641-2020 | +1 (952) 641-2020
info@flypremierjet.com

Copyright © 2024 Fargo Jet Center LLC. All Rights Reserved. Privacy Policy.